Sometimes during heavy rain, you may wish to lower the level of water in the pool. If you have a Sand Filter, please follow the steps below:
Caution:
- Do Not operate the filter valve while the pool pump is running.
- Stay close to the power switch while keeping your body away from the filter.
- Keep a close watch on the filter pressure gauge.
(If filter pressure is high, shut down immediately)
Steps:
- Turn the pool pump power off.
- Fully depress and turn the filter valve to waste.
- Turn the pool pump power on until the water has been lowered to the required level.
- Turn the pool pump power off
- Fully depress and turn the filter valve to rinse
- Turn the pool pump power on for 30 seconds
- Turn the pool pump power off.
- Fully depress and turn the filter valve to Filter
- Turn the pool pump power on for 30 seconds
- Turn the Filtration Power back to auto